Angle iron ceramic fiber module is a commonly used anchor form for ceramic fiber module at present. Its embedded anchor type is:

Module anchors: angle iron anchors, gear shapers, bolts and nuts shall be installed on site.

Structural features of angle iron ceramic fiber module:

This structural form of ceramic fiber folding module is used to fix the fiber module through angle iron anchors and threading bars, and to connect the fiber module to the furnace wall steel plate with bolts and nuts. It has the following characteristics:

a. Single piece installation and single piece fixation, which can be disassembled and replaced at any time, making its maintenance very convenient.

b. Because it can be installed and fixed in a single piece, and the installation and arrangement mode is flexible, the parquet floor type installation and arrangement or the sequential and same direction arrangement structure along the folding direction can be adopted.

c. Due to the adoption of reinforcement inserting and fixing, the installation and fixing are relatively firm, and can be processed into blanket strip combination module and special-shaped combination module.

d. The distance between the anchor and the working hot surface is large, the contact points between the anchor and the furnace shell are few, and the wall lining has good heat insulation performance.

e. It is especially applicable to the installation of wall lining at the furnace top.