Before answering this question, let's first understand what is ceramic fiberboard and what is the manufacturing principle of ceramic fiberboard?

First of all, ceramic fiber board is a kind of vacuum formed board after ceramic fiber bulk cotton crushing and adhesive pulping.

So, what is the purpose of ceramic fiberboard?

Ceramic fiber board has many uses, such as heat insulation, fire resistance, heat preservation, sound absorption, noise reduction, thermal shock resistance and so on. Thermal insulation is the basic performance of ceramic fiber board, which has the advantages of insulation, sound absorption and so on. Ceramic fiberboard has a wide range of applications, such as backing insulation and heat preservation of various kilns, wall lining insulation of kilns, furnace fire protection in metallurgical industry, refractory brick backing of electrolytic reduction cells in aluminum plants, heat insulation and insulation in high temperature environment, and fire and sound insulation of KTV boxes.

Then, can ceramic fiberboard be machined with customized shaped parts?

The answer is yes. The density of ceramic fiber board ranges from 280kg/m3 to 320kg/m3. The density is very uniform and the performance is stable. The conventional size is 900*600*20/25/30/50mm. It is a non brittle material and becomes a substitute for asbestos board. Ceramic fiberboard is also easy to cut and process. Different shapes and sizes can be customized. Users can also use the art knife to process the required sizes and specifications, which is very convenient.

Finally, what is the manufacturing principle of ceramic fiberboard?

The manufacturing principle of ceramic fiber board is to use the blowing fiber (short, fine, easy to break and mix) as the raw material of ceramic fiber board, and add a certain proportion of bonding agent. The filler grade auxiliary agent is fully dispersed into slurry in the slurry mixing tank through the beater, pumped into the forming tank and stirred with compressed air. The slurry mold is put into the forming tank. The principle of vacuum pumping is used to make the fiber slurry adsorb on the mold. The adsorption time is accurately controlled. The wet fiber material is vacuum dewatered, demoulded, and placed on a tray and sent to the drying furnace for drying for 10-24 hours. The dried thick fiber board is dried through a special grinding machine and edge cutting machine, Accurately control the size.

The above is the manufacturing principle of ceramic fiber board. According to its manufacturing principle, it can be seen that the board is a product with very good product quality and good use effect. However, it should be noted that no matter how good the product is, it needs to be properly installed and used to give full play to its function.